Features:

The COMeap EVGA 6 Pin to 3x 4 Pin Molex hard drive power supply cable is used to connect EVGA PSU to riser card or hard drive..

Support:

Only EVGA PSUs such as: SuperNOVA G1(650G1/750G1/1000G1), SuperNOVA G1+(650G1+/750G1+/850G1+/1000G1+), GS(650GS/850GS/1000GS/1050GS);

SuperNOVA G2(650G2/750G2/850G2/1000G2/1300G2/1600G2), SuperNOVA G3(550G3/650G3/750G3/850G3/1000G3);

SuperNOVA B2(750B2/850B2), B3(450B3/550B3/650B3/750B3/850B3);

SuperNOVA P2(650P2/750P2/850P2/1000P2/1200P2/1600P2), SuperNOVA 1000PS;

SuperNOVA T2(750T2/850T2/1000T2/1600T2), SuperNOVA nex650g;

Please note that it is not compatible with semi modular power supply such as EVGA 1000GQ.

Specification:

Cable Length: main 20inches(50cm)+secondary 6inches(15cm)+thridary 6inches(15cm) ,Between 2 SATA: 6 inches(15cm)

Connectors: 1x 6 pin male, 3x Molex 4 pin female

Including:

EVGA 6 Pin to 3x 4 Pin Molex hard drive power supply cable*1pcs;

Warranty: 1 year;

Note: 1.This cable is just allowed to connect 2pcs riser cards at most. It will be damaged or burned at any time for connecting 3pcs riser cards;

2.This cable is only designed for EVGA PSUs, not compatible with other brand PSUs. If you use other brand PSUs, it will burn or damage the hard drive. Please check the third point and desription about the compatible types;

3.It is not compatible with semi modular EVGA power supply such as EVGA 1000GQ Please feel free to contact us when to buy it if you are not sure if it works with your power supply.